[ Home ] [ Up ] [ Feedback Page ] [ Search ] [ Table of Contents ] [ How to Find Us ]

Heat Shrink Tunnels

Standard Features:

	Chamber opening - 21"W x 44"L x 10"H (53cm x 112cm x 25cm)
	9000 watts of heating power
	220V, single phase
	Variable speed conveyor
	Fully insulated heat chamber
	Control panel on the outside of the heat chamber for longer component lifespan
	Digital precision temperature control
	Automatic cool down
	Air directional controls
	High efficiency finned rod heating elements
	Bottom air flow heat transfer system
	Adjustable levelers
	One year warranty
	Overall dimensions - 70"L x 43"W x 59"H (178cm x 109cm x 150cm)
	Approximate shipping weight 825 lbs. (374kgs.)

Standard Features:

	Chamber opening - 31"W x 44"L x 17"H (79cm x 112cm x 43cm)
	12,000 watts of heating power
	220V, three phase
	Variable speed conveyor
	Fully insulated heat chamber
	Control panel on the outside of the heat chamber for longer component lifespan
	Digital precision temperature control
	Automatic cool down
	Air direction controls
	Variable air velocity control
	High efficiency finned rod heating elements
	Bottom air flow heat transfer system
	Adjustable levelers
	One year limited warranty

Standard Features:

	Chamber opening - 15"W x 60"L x 8"H (38cm x 152cm x 20cm)
	13,500 watts of heating power
	220V, three phase
	Variable speed conveyor
	Fully insulated heat chamber
	Control panel on the outside of the heat chamber for longer component lifespan
	Digital precision temperature control
	Automatic cool down
	Air direction controls
	Variable air velocity control
	High efficiency finned rod heating elements
	Bottom air flow heat transfer system
	Adjustable levelers
	One year limited warranty

Shrink Packaging Systems

Clamco's new 110 Series Semi-Automatic L-Sealer System features a seal area up to 15" x 20", an adjustable film cradle and separator tray with pinwheel perforator, a microprocessor-controlled heat cycle with temperature compensation and a film burn-off feature. This USDA approved, unitized system operates on 115 volt house current, and when combined with our new Model 810 Heat Shrink Tunnel, gives you economical, production level L-Sealer performance and value!

Standard Features:

Clamco's compact 110 Series Shrink Packaging Systems come complete with L Sealer and shrink tunnel in one low cost unit. Designed to use 110 to 120 volt electrical supply circuits, the 110 Series are ruggedly constructed and easy to operate. Standard features include the microprocessor heat control system with automatic temperature compensation and burn-off switch, height adjustable heavy duty seal head with film clamps, adjustable height wrapping platform, adjustable heavy duty seal pads, and heavy duty film cradle with brake. The tunnel's 2500 watts of heating power along with its temperature controllable, variable speed, heated conveyor belt produces attractively shrink wrapped packages in seconds using standard polyolefin and PVC shrink films.

	Unitized sealer/tunnel combination
	Microprocessor controlled heat cycle with temperature compensation
	Film burn off control
	Height adjustable seal head with film clamps
	Adjustable package tray
	Adjustable seal pads
	High efficiency heat tunnel is controllable up to 500 degrees
	Variable speed, variable temperature, silicone coated, conveyor belt
	Pin wheel perforator or impulse hole punch
	Unitized film separator tray and film cradle with adjustable brake
	Designed to seal and shrink most polyolephin and PVC shrink films
	One year limited warranty
	Operates on 120V

 

The 770 Series L Sealers offer an outstanding package of standard features and are available in a wide variety of seal area sizes and option packages for effective selection of the best shrink packaging machinery for the job intended. With the 770 Series you can truly achieve maximum cost effectiveness in the purchase of your shrink packaging system.

Standard Features:

	Microprocessor controlled heat cycle with temperature compensation
	Film burn off control
	Height adjustable seal head with film clamps
	Adjustable package tray
	Adjustable seal pads
	Pin wheel perforator or impulse hole punch
	Designed to seal most polyolephin, polyethylene, and PVC shrink films
	Seal area sizes from 15" x 15" up to 30" x 48"
	Unitized film separator tray and film cradle with adjustable brake
	One year limited warranty
	Operates on 120V up to 30" x 36" sealing area, larger operate on 220V, single phase

The Clamco 6600 Series Automatic L Sealer provides the ability to wrap a wide variety of goods at speeds of up to 35 packages per minute without operator assistance. Compact, versatile, simple to set up, and easy to service, the 6600 Series employs specially coated sealing knives for smoke free sealing of all shrink films. Conveniently located mechanical and electrical controls provide ease of operation and fast product change over. The 6600 Series is equipped with obstruction sensors in the sealing head and film advance mechanism, is well guarded, and has a prominently located emergency stop button. Ruggedly built and affordably priced, the U.S. made Clamco 6600 Series is your best buy in automatic L sealers today.

As part of the most extensive line in the industry, Clamco's new 6600 Series Automatic L-Sealer System features a seal area of 18" x 23.5", production speeds up to 35 packages per minute, variable conveyor and film advance speeds up to 100 FPM. You can rely on the performance of hundreds of machines already around the world! When combined with our new Model 853 Heat Shrink Tunnel, this system gives you unbeatable field-proven value!

Standard Features:

	Hot knife sealing system with a 18" x 23.5" seal area (45cm x 59cm)
	PLC controls
	Keypad operator interface with a quick release feature and 6 ft. extension cable
	Adjustable height sealing jaws
	Quick adjusting in feed conveyor for easy product changeover
	Adjustable inverting head
	Tension adjustable scrap reel
	Adjustable pin wheel perforators
	Cycle counter
	Automatic shut down
	Adjustable sealing arm speed
	Fully enclosed sealing area
	Smooth transfer conveyors
	Obstruction sensors mounted on the seal head and the film advance system
	E-stop button
	USDA approved
	Designed to seal most polyolephin, polyethylene, and PVC shrink films
	Casters and levelers

 

Standard Features on PLC Keypad Operator Interface:

• Automatic or set-up modes
• Manual film feed and sealing
• Hot knife temperature set point and independent feedback
• Conveyor and film advance motor speed settings (Model 6650 only)
• Leading and trailing edges
• Automatic shut down time
• Counter reset

Bag Sealers